TANDBERG Codec 3000 MXP Reference Manual page 107

Configuration-type Commands – xconfiguration / configuration.xml
Prest
cont...
Preset [1..15] Camera
Preset [1..15] Camera
Preset [1..15] Camera
Preset [1..15] Camera
Preset [1..15] Camera
Preset [1..15] Camera
D 13887.08
MAY 2008
Brightness Level: <0..16>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt,
consult your camera's user documentation.
xconfiguration preset 1 camera brightness level: 12
Example:
Autofocus: <On/Off>
Enables or disables autofocus when activating a preset. If enabled, autofocus will be turned on for 5 seconds. If
disabled, the preset's focus value will be used. Default is Off.
Example: xconfiguration preset 1 camera autofocus: off
Focus: <0..65534>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt, consult your camera's user
documentation.
xconfiguration preset 1 camera focus: 32768
Example:
Pan: <-32768..32766 >
Interpretation of the settings chosen will depend on the camera type you use. If in doubt, consult your camera's user
documentation.
xconfiguration preset 1 camera pan: 0
Example:
Tilt: <-32768..32766>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt, consult your camera's user
documentation.
xconfiguration preset 1 camera tilt: 0
Example:
Zoom: <0..65534>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt, consult your camera's user
documentation.
xconfiguration preset 1 camera zoom: 32768
Example:
107
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Presets should never be
modified manually, except for the
Preset Name.
Please refer to the xcommands:
- PresetStore
- PresetClear
NOTE! The preset configura-
tions are numbered from 1 to
15, whilst the PresetStore/
PresetClear
commands are referring presets
from 0 to 14, i.e. the configura-
tions are offset by 1.
MXP