Dialglobalentry; Dialgroupentry; Diallocalentry - TANDBERG Codec 3000 MXP Reference Manual

Command Information
DialGlobalEntry — DialLocalEntry
Command Description

DialGlobalEntry

Command used to dial a
number from the global
directory (the Global
Directory is downloaded
to the system by an
external application).

DialGroupEntry

Command used to dial
an entry from the Group
Directory. Dialling from
the Group Directory
makes it possible to
set up a MultiSite
conference in one
operation.

DialLocalEntry

Command used to dial a
number from the locally
stored directory.
Required parameters are identified by an (r) appended to the parameter name. The
D 13887.08
MAY 2008
Parameters
GlobalEntryId(r): <1..400>
Reference to the directory entry to
be dialed.
GroupEntryId(r): <1..50 >
Reference to the directory entry to
be dialed.
LocalEntryId(r): <1..200>
Reference to the directory entry to
be dialed.
(r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Result parameters Result parameters
when OK when error
As above
CallRef: <1..11>
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1...>
Unique reference
to call. Identifies
the call in the call
log.
The system As above
will return the
following elements
for each call
initiated.
CallRef: <1..11>
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1...>
Unique reference
to call. Identifies
the call in the call
log.
CallRef: <1..11> As above
Reference to the
call. To be used
as reference when
monitoring the call.
LogTag: <1...>
Unique reference
to call. Identifies
the call in the call
log.
153
TANDBERG 3000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Example
xcommand dialglobalentry globalentry-
id:19
*r Result (status=OK):
CallRef: 1
LogTag: 312
*r/end
OK
xcommand dialgroupentry groupentryid:19
*r Result (status=OK):
CallRef: 2
LogTag: 313
CallRef: 1
LogTag: 312
CallRef:
*r/end
OK
xcommand diallocalentry localentryid:15
*r Result (status=OK):
CallRef: 1
LogTag: 312
*r/end
OK
& 6000 MXP