Pri - TANDBERG Codec 3000 MXP Reference Manual

Status Information – xstatus /xstatus.xml

PRI

PRI (ready = True / False)
False
If ready = the following will be included:
Layer1Alarm: RedAlarm / YellowAlarm / BlueAlarm
Example:
*s PRI (ready=False):
Layer1Alarm: RedAlarm
*s/end
True
If ready = the following will be included:
Channel [1..24/31] (type = BChannel / DChannel
NA / Idle / Calling / Answering / Proceeding / Connect / Disconnecting /
status =
DChannel NA
If type = and status = the following will be included:
<Nothing>
BChannel / DChannel
If type = and status =
<Nothing>
BChannel Calling / Answering / Proceeding / Connect
If type = and status =
CallingNumber:
ConnectionTime:
BChannel Disconnecting / Disconnected
If type = and status =
CallingNumber
CauseLocation
ChannelCause
ConnectionTime
Status information followed by a
D 13887.08
MAY 2008
Idle
the following will be included:
the following will be included:
the following will be included:
*
will not be shown unless Detailed Level has been set to 2 – see
Disconnected)
XACLI – Special commands – xpreferences
201
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP