Do Not Disturb / Sleep Mode; Adjusting Volume; Microphone On/Off; View Outgoing Video (Selfview) - TANDBERG Videoconferencing System Short User Manual

Add MultiSite*
When selecting 'MultiSite', an empty MultiSite directory entry is displayed:
Enter the MultiSite meeting name. Select 'Add Site' to add a site to the meeting by searching for point-to-point
entries in the directory list. Select 'Quality' to override the suggested bandwidth per site.

Adjusting volume

Press V to adjust the volume level. An on-screen indicator will show the current level.
OLUME
+
-

View outgoing video (selfview)

selfview
Press the S
ELFVIEW
Press M PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
move pip
OVE
switch it off.

Microphone on/off

mic off
To mute your microphone, press M
Press M O to activate the microphone again.
IC FF

Do Not Disturb / Sleep Mode

Press 'Standby' when not in a call to activate the Quick Menu.
When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy
tone when calling this unit. A status line will indicate when Do Not Disturb is active.
When Sleep Mode is activated, the monitors will be black. The system will still accept incoming calls.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
* - Optional feature and not available on all systems.
TANDBERG Videoconferencing System
key to view your outgoing video.
O . An on screen indicator will appear.
IC FF
7
General use