Sided (Making 2 Sided Copies); Finishing (Outputting By Specifying Finishing) - Xerox 4110 User Manual

3 . C o p y
3 - 8 2
! 4 images
Four copies of the document image are made on a single sheet of
paper.
! 8 images
Eight copies of the document image are made on a single sheet of
paper.

2 Sided (Making 2 sided copies)

This feature is the same as 2 Sided in the Basic Copying tab.
For more information, refer to "2 Sided (Making 2 sided Copies)"
on page 3-23.

Finishing (Outputting by specifying finishing)

You can specify the copy output method. When Stapling is
specified, each set of copies can be stapled and then output. In
addition, the output position of copies is offset alternately to
distinguish each set of copies. When the Offset Stacking Module is
installed, the output position of copies is offset alternately to
distinguish each set of copies.
1.
From the Output Format tab, select Copy Output/Stapling.
2.
Select any item.
3.
Select Save to keep your choices.
! Auto
Copies are output collated when Auto Document Feeder, 2 Sided
Book Copy, Blank Separators + N Sets or No Separators + N Sets
of Transparencies, Booklet, Stapling, Build Job, Sample Set and
Large Volume Documents are set.
! Collated Stapling/Punching
The machine can output sheets sorted into sets that are arranged
in page order.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e