Xerox 4110 User Manual page 416

Hide thumbs Also See for 4110:
Table of Contents

Advertisement

1 2 . P r o b le m S o l v in g
Category
Error Code
C P S M O
027-452
027-500
027-501
027-502
027-720
027-721
027-722
027-724
027-725
027-726
027-727
1 2 - 4 0
% Cause
IP address already exists.
Remedy
Change the IP address.
For information about network settings, refer to the System
Administration Guide.
% % Cause
Unable to resolve SMTP server name during answer
E-mail send.
Remedy
Check that the SMTP server settings from CWIS are
correct.
% % Cause
Unable to resolve POP3 server name when using POP3
protocol.
Remedy
Check that the POP3 server settings from CWIS are
correct.
% % Cause
Unable to login to POP3 server when using POP3
protocol.
Remedy
Check that the user name and password used in the
POP3 server from CWIS are correct.
% Cause
Unable to find the server of an application interface
destination.
Remedy
Check DNS server application or check whether an
application interface installed on the computer is
registered by DNS server or not.
% Cause
An application interface destination does not exist.
Remedy
Check whether an interfaced application operates
correctly.
% Cause
The job was timed out during connection with an
application interface destination. An application linkage
destination does not exist.
Remedy
Try to process the job flow.
% Cause
An application interface destination could not be
accessed.
Remedy
Check whether an interfaced application operates
correctly. When it is operating, check the log. When it is
not operating, check the network environments.
% Cause
A job operation failed using an application interface.
Remedy
Check whether an application linked operates correctly.
When it is operating, check the log. When it is not
operating, check the network environments.
% Cause
The job status is unclear during an application interface.
Remedy
Check whether an application linked operates correctly.
When it is operating, check the log. When it is not
operating, check the network environments.
% Cause
A parameter is illegal during an application interface.
Remedy
Try to process the job flow.
Cause and Remedy
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e

Advertisement

Table of Contents
loading

This manual is also suitable for:

4590

Table of Contents