Xerox 4110 User Manual page 131

3 . C o p y
! Off
Build Job is not applied.
! On
Build Job is applied. The features that apply to the entire job must
first be selected as necessary.
KEY POINT: Once selected, the settings cannot be changed or
canceled during the copy process.
Copy features that can be programmed, are listed on this page.
! Finishing
For information about finishing feature, refer to "Finishing
(Outputting by specifying finishing)" on page 3-82.
! Booklet Creation
For information about booklet creation feature, refer to "Booklet
Creation (Creating a Booklet)" on page 3-51.
! Covers
For information about cover feature, refer to "Covers (Attaching a
Cover to Copies)" on page 3-55.
! Annotation
For information about annotation feature, refer to "Annotation
(Adding Stamp/Date/Page Number to Copies)" on page 3-63.
! Separators
Displays the Build Job - Separators screen.
! Watermark
For information about watermark feature, refer to "When Enter
End Page Number is Selected" on page 3-73.
! Output Orientation
For information about output orientation feature, refer to "Output
Orientation (Specifying Face Up or Down)" on page 3-79.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
3-87