Xerox 4110 User Manual page 384

1 2 . P r o b le m S o l v in g
Symptoms
Documents are
often jammed.
A corner of the
document is
folded.
Stapler faults
1 2 - 8
Check
Is the right type of document
used?
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents affixed with
sticky labels, paper clips or
adhesive tape?
Are the document guides at
the correct position?
Is part of the document
ripped, and a piece of paper
remaining in the document
feeder?
When importing originals of
different sizes, is the
Mixed Size Originals
setting set to ON?
Is an A5-size document
loaded horizontally ( ) on
the document feeder when
the Mixed Size Originals
feature is in use?
Is the document curled?
–
Remedy
Properly load a document that can be
handled by the document feeder.
Refer to "Step 1 Loading Documents" on
page 3-2.
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Properly set the document guides.
Refer to "Step 1 Loading Documents" on
page 3-2.
Open the document feeder cover and
check inside.
Refer to "Document Jams" on page 12-79.
Set Mixed Size Originals to ON.
Refer to "Mixed Size Originals (Scanning
Different Size Documents Simultaneously)"
on page 3-37.
Load the A5-size document vertically ( ).
Flatten out the curl and load the document
again.
Refer to "Stapler Faults" on page 12-83.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e