Changing The Size Of Paper In Trays 6 To 7 - Xerox 4110 User Manual

8 . P a p e r a n d O t h e r M e d ia

Changing the Size of Paper in Trays 6 to 7

8 - 1 6
Following section describes how to change the paper size on trays
6 to 7.
NOTE: When changing the paper size to non-standard size
loaded in trays 6 and 7, contact your Customer Support
Center. If doing so, it never returns to the original setting.
1.
Pull out the tray towards you until it stops.
WARNING:When pulling out the paper tray, do it slowly.
If pulled out with too much force, the tray can hit and
injure your knees.
2.
Remove any paper loaded on the tray.
3.
Loose the screw on the right to remove your side and the other
side guide.
4.
Attach the guides according to the hole of the paper size to
change, and tighten the screws.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e