Build Job - Separators Screen - Xerox 4110 User Manual

3 . C o p y
3 - 8 8

Build Job - Separators Screen

You can insert blank or printed sheets of paper to act as
separators between document jobs. The number of separators
can be set from 1 to 99 as required.
1.
From the Job Assembly tab, select Build Job and then select
Separators.
2.
Select any item.
3.
Use and or numeric keypad to set the number of copies.
4.
Select Save to save your choices.
! Off
No separator.
! Blank Separators
Insert a blank paper as a separator.
! Printed Separators - Side 1
Copies on side 1 when inserting separators.
! Printed Separators - Side 2
Copies on side 2 when inserting separators.
! Printed Separators - 2-Sided
Copy on the both sides when inserting separators.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e