Changing The Size Of Paper In Trays; Changing The Size Of Paper In Trays 3 To 4 - Xerox 4110 User Manual

8 . P a p e r a n d O t h e r M e d ia

Changing the Size of Paper in Trays

Changing the Size of Paper in Trays 3 to 4

8 - 1 4
This section describes how to change the paper size loading in the
paper trays.
NOTE: If you need to change the paper size for trays 1 and 2,
contact the Customer Support Center.
The quality of the paper loaded in a tray is a configurable
item. Normally, plain paper is set. When changing the
setting to a different paper quality, change the paper
quality settings to match the type of paper to be loaded to
maintain high print quality.
For more information about paper quality, refer to "Paper
Tray Attributes" in the System Administration Guide.
When setting a non-standard paper size, you must register
the paper size. For information about registering paper
sizes, refer to "Paper Size Settings" in the System
Administration Guide.
For a description of how to make copies on non-standard size
paper, refer to "Paper Supply (Selecting the Paper to Use for
Copying)" on page 3-19. For a description of how to print to non-
standard size paper, refer to the online help for the print driver.
Following describes how to change the paper size on trays 3 to 4.
1.
Pull out the tray towards you until it stops.
WARNING:When pulling out the paper tray, do it slowly.
If pulled out with too much force, the tray can hit and
injure your knees.
2.
Remove any paper in the tray.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e