Xerox 4110 User Manual page 413

Category
Error Code
C P S M O
016-748 % %
016-749 %
016-755 %
016-756
016-757
016-758
016-759
016-760 %
016-761
%
016-762 %
016-764
016-765
016-766
016-767
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
% Cause Printing is not possible due to insufficient hard disk
space.
Remedy Reduce the number of pages of print data, for example,
by dividing up the print data or printing one copy at a
time when making multiple copies.
Cause A PJL command syntax error occurred.
Remedy Either confirm the print settings, or correct the PJL
command.
Cause Attempted to process PDF file which was specified to
printing prohibited.
Remedy Cancel the printing prohibited specification using Adobe
Reader and try to print again.
% Cause No permissions to use the service.
Remedy Check with your System Administrator.
% Cause Password is incorrect.
Remedy Enter the correct password.
% Cause No Permissions to use service.
Remedy Check with your Auditron Administrator.
% Cause Maximum number of pages for this service has been
reached.
Remedy Check with your Auditron Administrator.
Cause An error occurred during PostScript processing.
Remedy Take one of the following actions:
Set Print Mode to Speed Priority.
#
Increase PostScript memory.
#
For information about Print Modes, refer to the print driver's online
help. For information about memory, refer to "Allocate Memory" in
the System Administration Guide.
Cause An error occurred during image processing.
Remedy Set the Print Mode to Speed Priority and start printing
again. If this does not remedy the error, print in the Ensure
Print mode.
Cause A print language not installed on the machine was
specified.
Remedy In Specify Print Mode under Port Settings, specify a
print language.
% Cause Could not connect to the SMTP server.
Remedy Contact the SMTP server administrator.
Cause Could not send mail as the hard disk on the SMTP
%
server was full.
Remedy Contact the SMTP server administrator.
% Cause An error occurred on the SMTP server.
Remedy Contact the SMTP server administrator.
% Cause Could not send mail as the mail address was wrong.
Remedy Check the mail address and transmit again.
1 2 . P r o b l e m S o l v i n g
Cause and Remedy
12-37