4 . S c a n
4 - 3 0
2 Sided Originals Screen
Select when you wish to specify the orientation of a document and
scan both sides.
1.
Select either 1 Sided or 2 Sided.
2.
When 2 Sided is selected, select Originals.
3.
Select Original Orientation.
4.
Select Save to keep your choices.
! Originals
Displayed when 2 Sided is selected in the Originals screen.
•
Head to Head
Select when both sides of a 2 sided document are in the
same position on the page.
•
Head to Toe
Select when both sides of a 2 sided document are in
opposite positions (The top of one side of the page is
printed in the same position as the bottom of the other side
of the page.).
! Originals Orientation
To scan using the document feeder, the orientation must be set to
indicate the top of the document.
NOTE: If the Original Orientation differs from the actual
document orientation, then the machine may mistakenly detect the
head of the document.
•
Head to Top
Select this when placing the top of the document facing the
inner side of the document glass or DADF.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e