Trouble During Copy; Unable To Copy - Xerox 4110 User Manual

Hide thumbs Also See for 4110:
Table of Contents

Advertisement

Trouble during Copy

Unable to Copy

Document not fed
properly from the
document feeder
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
This section describes solutions for problems encountered during
copying.
This section describes solutions when unable to copy.
Cause
Document size is too small.
Action The minimum size of the document that can be
loaded on the document feeder is A5.
Refer to "Step 1 Loading Documents" on page 3-2.
Cause
The right type of document is not being used.
Action The document feeder cannot be used with irregular
sized documents, business cards, transparencies, or
thin documents.
In addition, documents with tags, paper clips, and
cellophane tape cannot be used.
Refer to "Step 1 Loading Documents" on page 3-2.
Cause
The document guides are in the incorrect position.
Action Set the document guides to correctly match the
document size.
Refer to "Step 1 Loading Documents" on page 3-2.
Cause
Part of the document is ripped, and a piece of paper
remaining in the document feeder.
Action Open the document feeder cover, and remove the
piece of paper.
Refer to "Document Jams" on page 12-79.
Cause
Documents of different sizes are set.
Action When using documents of different sizes, you must
specify Mixed Size Originals, otherwise a paper
jam will result. When setting documents of different
sizes, be sure to specify Mixed Size Originals.
Refer to "Mixed Size Originals (Scanning Different
Size Documents Simultaneously)" on page 3-37.
1 2 . P r o b l e m S o l v i n g
12-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

4590

Table of Contents