Loading Paper In Tray 5 (Bypass) - Xerox 4110 User Manual

Hide thumbs Also See for 4110:

Table of Contents

Loading Paper in Tray 5 (Bypass)

X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e

When printing or copying with paper that does not match the sizes

or types in trays 1 to 4 and the optional trays 6 to 7, use Tray 5

(Bypass). Following describes how to load paper into

tray 5 (Bypass).

To make detailed instructions during printings, specify the

instructions using the Tray/Output tab in the print driver. When

doing this, also specify the type of paper to load.

NOTE: When adding paper to Tray 5 (Bypass), remove any paper

remaining in the tray, add it to the stack of paper to be

added, then load all of the paper into the tray at once.

Open Tray 5 (Bypass) as necessary.

NOTE: If necessary, extend the extension flap. The extension flap

can be extended in two stages. When pulling out the

extension flap, do it gently.

Hold the center of the paper guides and slide them to the

desired paper size.

8 . P a p e r a n d O th e r M e d i a