Xerox 4110 User Manual page 38

2 . P r o d u c t o v e r v i e w
No. Component
27 Tray 8/Post-process inserter
(Cover/Transparency
separator tray)
28 Decurl button
29 Output tray
30 Finisher tray
31 Booklet output tray
32 Booklet output tray button
33 Right cover
34 Staple cartridges for booklet
35 Staple cartridge
36 Punch scrap container
37 Tri-Fold output tray (optional)
38 Tri-Fold output tray button
39 Left cover.
40 Staple cartridge storage
space
NOTE 1: Throughout this guide, Finisher D and Booklet Finisher D may be referred to simply as the Finisher.
NOTE 2: Throughout this guide, the Duplex Automatic Document Feeder is abbreviated as "Document Feeder."
2 - 4
Load paper for cover or transparency separators. Paper loaded here is not used
for copying.
Press this button to decurl copied paper.
Copies are delivered here when specific output features are selected, such as
Automatic sorting, Collated, Uncollated, or Normal.
Receives copies when you select stapled, punched, and Z-folded copies.
Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
Press this button to deliver and retrieve booklets from the output area.
Open to clear paper jams, replace staples, clear jammed staples, or replace the
scraps from the puncher.
There are two staple cartridge for booklet. Remove this cartridge to replace
staples and clear staple jams.
Contains staples; remove this cartridge to replace staples and clear staple
jams.
Collects the scraps from the puncher. Open to remove the scraps.
Receives copies when you select Tri-Fold In or Tri-Fold out.
Press this button to open tri-Fold output tray.
Open this cover to access the machine and to clear paper jams.
Staple cartridge for replacement can be stored.
Function
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e