Folding (Outputting Bi-Folded Or Tri-Folded Paper) - Xerox 4110 User Manual

3 . C o p y
3 - 8 0
! Auto
Automatically determines whether the copies should be output
facing up or down.
! Face Up
Copies are output facing up and delivered from the last page.
! Face down
Copies are output facing down and delivered from the last page.
! Face Up Reverse Order
Copies are delivered from the first page facing up.
NOTE: Whether Face Up Reverse Order is displayed depends
on the system setting. For how to display it, refer to the System
Administration Guide, Chapter 9 Setups, "Copy Mode Settings."

Folding (Outputting Bi-Folded or Tri-Folded paper)

You can make copies to be folded in half or in thirds.
KEY POINT: An optional package is necessary for this selection.
For more information, contact the Customer Support Center.
KEY POINT: The orientation of documents is limited to short-edge
feed; therefore, you must select a paper tray set with short-edge
feed stock.
1.
From the Output Format tab, select Folding.
2.
Select any item.
3.
Select Save to keep your choices.
! None
A copy is not folded.
! Z Tri-Fold
Copies are folded in three out.
! C Tri-Fold
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e