Step 4: Stopping The Copy Job; Making Copies Using The Manual Feed-In Shelf (Bypass) - Xerox Wide Format 6604 User Manual

Step 4: Stopping the Copy Job

Press the Stop button on the Control Panel or the Scanner. If the scanner is in the
prefeed mode, press the Scanner Forward or Reverse button to eject the original
document.
NOTE
The Clear Pathway message screen displays if the scan is not in the prefeed
mode. In this case, follow the instructions on the User Interface as indicated.
Making Copies Using the Manual Feed-in
Shelf (Bypass)
The Manual Feed-in Shelf (Bypass) feature enables copying using cut sheet media. Only
one sheet may be loaded at a time.
1. Select Copy on the Services menu.
2. Select the Manual Feed-in Shelf (Bypass) from the Copy screen above.
NOTE
Listed under Media Source are the current settings for size and type of media
for both roll and cut sheet media.
NOTE
If after selecting this Media Source, you start scanning the original before
loading the cut sheet media, a Load or Change Media Type message will display.
®
Xerox Wide Format 6604/6605 Solution
User Guide
Printing and Copying Documents
2-7