Making Copies; Controlling The Scan - Xerox 6030 User Manual

Making copies

Controlling the scan

Xerox 6030/6050 Wide Format Copy System
Making copies
When the Graphical Display indicates READY TO COPY, the Xerox
6030/6050 Wide Format Copy System is ready to make copies.
Several settings are available for controlling how the SCAN SYSTEM
starts and finishes a scan. These settings are accessible from the SCAN
SYSTEM CONTROL option of the CONFIGURATION menu.
SCANNER CONTROL
4
AUTOSCAN
DOCUMENT RETURN:
MODE:
PRODUCTIVITY — ARCH
When making a copy, you need to be aware of these settings. If any of
these settings have been changed from the default settings, the SCAN
SYSTEM may not operate according to your expectations.
Below is a brief summary of the scan control settings. For complete
information about these settings, refer to "Scan System Control" in the
"Main Menu" section of this manual.
AUTOSCAN
AUTOSCAN enabled is the default setting. Normally, the AUTOSCAN
mode is enabled. When it is enabled, the SCAN SYSTEM automatically
begins the scanning of a document when the document is inserted. If
AUTOSCAN is disabled, the SCAN SYSTEM transports the document to
the starting position and then waits for you to press the Start key before
beginning the scan.
DOCUMENT RETURN
FRONT is the default setting. When the DOCUMENT RETURN feature
is set to FRONT, the SCAN SYSTEM returns the document to the front
or READY position at the completion of the scan. When the
DOCUMENT RETURN feature is set to REAR, the SCAN SYSTEM
delivers the document to the rear Stacker at the completion of the scan.
FRONT
Making copies 47