Xerox 4110 User Manual page 420

1 2 . P r o b le m S o l v in g
Category
Error Code
C P S M O
116-720 %
116-740
%
116-747 %
116-748 %
116-749 %
116-771 %
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-790
116-780
123-400 %
127-210
%
127-211 %
1 2 - 4 4
Cause An error occurred during printing as there was
insufficient memory.
Remedy Stop unnecessary ports and remove unnecessary data
from the hard disk to increase free disk space.
Cause Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
Remedy Check the print data.
Cause There are too many paper margin values for the
HP-GL/2 effective coordinate area.
Remedy Reduce the paper margin values, and instruct it to print
again.
Cause There is no plot data in the HP-GL/2 print data.
Remedy Check the print data.
Cause Job cancelled because the specified font was
unavailable.
Remedy Install the font or set up a font replacement on the print
driver side.
Cause There was a problem with parameters in the JBIG data.
They were automatically edited.
Remedy If any problem occurs in job result, try to process the job
again.
% % Cause There is a problem with the document attached to the
received mail.
Remedy Check the attached document.
Cause A malfunction occurred in the machine.
Remedy Power-cycle the machine. If the machine error is not
fixed by performing the relevant remedy, contact the
Customer Support Center.
% Cause Communication error between the printer and the
EXP4110 controller. Error detected by the printer.
Remedy Remove and reinsert the cable connection between the
printer and the EXP4110 controller. Power off and on
both the printer and the EXP4110 controller. If the
problem persists, call the Customer Support Center.
% Cause Detected a communication error between the printer and
the EXP4110 controller.
Remedy Remove and reinsert the cable connection between the
printer and the EXP4110 controller. Power off and on
both the printer and the EXP4110 controller. If the
problem persists, call the Customer Support Center.
Cause and Remedy
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e