Xerox 4110 Customer Release Notes
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Print Server
  5. Legacy 4110
  6. Customer release notes

Xerox 4110 Customer Release Notes

Version 1.0
Hide thumbs Also See for 4110:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual, User Manual
T
O PRINT THE
T
O PRINT THE
System
Copyright 2005 © Electronics for Imaging, Inc.
Customer Release Notes
Fiery EXP4110 version 1.0
This document contains information about the Fiery EXP4110 version 1.0. Before using
the Fiery EXP4110 with version 1.0, make copies of these Customer Release Notes and the
Quick Connect Guide and distribute them to all users.
This document uses the term "Fiery EXP4110" to refer to the Fiery EXP4110.
N
:
OTE
The term "printer" is used to refer to the Xerox 4110 printer.
Before printing to the Fiery EXP4110, make sure system software version 1.0 is installed
on the Fiery EXP4110. To determine this, print a copy of the Configuration page.
C
ONFIGURATION PAGE FROM
1 In Command WorkStation, choose Print Pages from the Server menu.
2 Click Configuration.
3 Click Print.
C
ONFIGURATION PAGE FROM THE
1 Make sure the information screen on the Fiery EXP4110 Control Panel reads Idle.
If Printing or RIPping appears, the Fiery EXP4110 is processing. You must wait until
the system finishes and reaches the Idle state.
2 At the Fiery EXP4110 Control Panel, press the Menu button to access the Functions menu.
3 Select Print Pages.
4 Choose Configuration.
You must also install user software version 1.0 on client computers. For instructions,
see Printing from Windows and Printing from Mac OS.
Font archiving
You cannot archive fonts using the Fiery EXP4110 Control Panel. A disk error occurs, and
the fonts are not backed up. As a workaround, use Command WorkStation to archive fonts.
Trying to reconnect message
If the message "Trying to connect" displays on the Fiery EXP4110 Control Panel, shut down
the Fiery EXP41100 and the printer, wait 10 seconds, and then turn both devices back on.
Recycling power on the printer
Any time you recycle power on the printer, you must also recycle power on the
Fiery EXP4110.
C
W
S
OMMAND
ORK
TATION
F
EXP4110 C
IERY
ONTROL
P
ANEL
Part Number: 45051581
23 September 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4110 and is the answer not in the manual?

Questions and answers

Related Manuals for Xerox 4110

Summary of Contents for Xerox 4110

  • Page 1 Fiery EXP4110 with version 1.0, make copies of these Customer Release Notes and the Quick Connect Guide and distribute them to all users. The term “printer” is used to refer to the Xerox 4110 printer. Before printing to the Fiery EXP4110, make sure system software version 1.0 is installed on the Fiery EXP4110.
  • Page 2 Printing from Tray 5 (Bypass Tray) by default To set a default for jobs to use the Bypass Tray, specify the tray at print time in the printer driver. WINS Address The WINS Address does not appear in Configure in DHCP mode when you configure Network Setup.
  • Page 3 • Two-Way Communication • All Fiery EXP4110 applications that search for Fiery EXP4110 controllers using SNMP (Command WorkStation and Downloader) • Xerox CentreWare • Xerox MIBs Login Window for SNMP After you change and save the community name, a Login window appears. To validate the...
  • Page 4 Page 4 Garbled diagnostic message (Brazilian Portuguese) In the Brazilian Portuguese server, if you right-click FieryBar and choose Run Diagnostics >Test I/F board, the message that appears is garbled. Time synchronization In local Setup, when you specify a time server for synchronizing the date and time for the first time (General Setup >...

  • Page 5: Printer Drivers

    Configuring Windows printer drivers To use the printer driver on Windows 2000/XP/Server 2003, you must first configure the options on the Advanced tab of the printer driver after installation is complete. O CONFIGURE THE OPTIONS ON THE 1 Windows 2000: Click Start, choose Settings, and then choose Printers.
  • Page 6 11 and 9 11 LEF Duplicate Paper Source settings In the Mac OS X printer driver, there are two Auto Select settings displayed for the Paper Source option. Member Printing and Saved Settings In the Windows printer drivers, if you save a collection of settings that include Member Printing information (such as a printing group name and password), assign the Saved Settings a name.
  • Page 7 Page 7 Page Size names might be incorrect In the Mac OS version 10.4 printer driver, some page size names might be incorrect. Letter-Cover (9 11) LEF is called 9 11 Envelope and B5 LEF is called JB5. Stapler Mode constraints In the Mac OS version 10.4 printer driver, the Stapler Mode settings are not constrained...
  • Page 8 0.5 inches horizontally. You must place and orient the text precisely on the page in the application that you are using. 3 When you are ready to print, open the Mixed Media dialog box from Printer Properties. 4 For each tab page that you designate in the application, you must specify the Tab Shift (shift by 0.5 inch) and the proper tab page size.
  • Page 9 NT spooler system. In order to know when to send a job to the spooler, a timeout is set on the printer port. Once a job is printed to the port, if this timeout passes with no more data presented to the port, the print job is sent to the spooler. The default timeout is 15 seconds.
  • Page 10 11 sheet between the Z-fold pages. This workaround also affects A3 and A4 paper sizes. Large PDF files Large PDF files might print slower than the printer's optimal speed. As a workaround, submit your job as Grayscale instead of Color. Tri fold “C”...
  • Page 11 Although this occurs, the job prints successfully. Stapling and Punching constraints Stapling and punching require that a finisher is installed on the printer. The finisher type determines the number of holes (2, 3, or 4) punched. Use the Punch Position print option to specify the position of punching. Use the Stapler Mode print option to specify the number (1 or 2) and position of staples.
  • Page 12 The following tables describe constraints and details for Fiery EXP4110. S = Stapling supported - = Not supported Supported page size with stapling position (punch position set to None) Page size A3SEF A4 LEF A4-Cover LEF 17 SEF 15 SEF 11 LEF 11 LEF (Letter Cover) 7.25...
  • Page 13 P = Punch supported S = Stapling supported - = Neither Stapling or Punching is supported * = Supported with certain finisher restrictions Supported Page size with Stapling/Punching Position (Punch Position set to 2, 3 or 4 Hole Punch) 2-Hole punch Front Rear Dual...
  • Page 14 LEF/SEF Stapling Position Staple positions vary according to paper size, paper type, number of pages and feed direction. The following table describes the single staple and dual staple positions for LEF and SEF applicable Page Sizes. Insert the feeding edge of your paper towards the finisher. Applicable page size Front staple...
  • Page 15 Dual staple positions Applicable page size Vertical text 250.0 mm or less in the paper feeding direction (including non- standard sizes) No standard size. 250.00 mm or more in the paper feeding direction (including non- standard sizes) B5, Executive, UK-Quatro, Letter, Letter- Cover, A4, A4-Cover...

  • Page 16: Booklet Printing

    Booklet printing Printing a booklet from Microsoft Word on Windows (PostScript printer driver) Booklet printing requires that a finisher is installed on the printer and that the printer driver is configured with the installed finisher. For information about configuring installable options, see Printing from Windows.
  • Page 17 Printing a PDF document as a booklet on Windows (PCL printer driver) Booklet printing requires that a finisher is installed on the printer and that the printer driver is configured with the installed finisher. For information about configuring installable options, see Printing from Windows.
  • Page 18 O PRINT A BOOKLET FROM 1 Open the document in the application. 2 Select File > Page Setup. 3 Choose the Fiery EXP4110 as your printer, set the Paper Size to 8.5x11 SEF (A4 SEF), and then click OK. 4 Select File >Print.

  • Page 19: E-Mail Printing

    11 Set Fasten Mode to Fold or Fold and Staple. For the limitations on folding and stapling, see “Centering Adjustment and Creep Adjustment and booklet printing” on page 19. 12 Choose Finishing 4 from the Feature Sets list. 13 Set Face-Down Printing to Face up. 14 Choose Finishing 1 from the Feature Sets list.

  • Page 20: Command Workstation

    Downloader File download limitation You can only download 17 files at a time. An error message indicating that a file cannot be opened might appear if you download more than 17 files. Ignore the message and click OK to locate the file. Command Job Log WorkStation...

  • Page 21: Paper Catalog

    Job Properties When you submit a print job to Command WorkStation, wait a few seconds after the job is imported, and then open Job Properties to make changes or print. If the job does not print, when Job Properties closes, right-click the job and select Print from the drop-down menu. Stapling imposed booklet jobs You cannot staple an imposed booklet job using EFI Impose.
  • Page 22 Print dialog box. Instead, set the Collate option on the Fiery Printing tab. To collate a job when you print from CorelDRAW or Microsoft Internet Explorer version 5 or 5.5, use the Collate option in the printer driver in addition to the Collate option within the application.
  • Page 23 Use the following procedures to print to a custom page size from Microsoft Word 2000, 2002, XP, or 2003 using the Windows PostScript printer driver. Specify the custom page size in one of two ways: using forms or not using forms.
  • Page 24 8 In Microsoft Word, choose Print from the File menu. 9 In the drop-down list next to Scale to Paper Size, select PostScript Custom Page Size. 10 Select the Fiery EXP4110 as the printer, and click OK to print the document. Microsoft PowerPoint 2003 on Windows 2000 When you print from Microsoft PowerPoint 2003 on Windows 2000, you might see repeated images or images that are reduced in one dimension in the printed output.

This manual is also suitable for:

Fiery exp4110

Table of Contents