Output Format; Split Send (Sending In Sections) - Xerox 4110 User Manual

4 . S c a n

Output Format

4 - 4 4
In the Output Format screen under E-mail, Scan to Mailbox,
Job Template, or Scan to FTP/SMB, you can configure the
output format.
1.
From the All Services screen, select either E-mail,
Scan to Mailbox, Network Scanning, or
Scan to FTP/SMB.
2.
Select the Output Format tab.
3.
Make a selection.
NOTE: Fields displayed vary depending on the selected feature.
The screen at right is for the e-mail feature.

Split Send (Sending in Sections)

This e-mail feature allows you to split a large document by pages
and send the pages as separate e-mails. You can also configure
the machine not to split a document.
NOTE: You can only use the Split Send feature when the File
Format in the Basic Scanning screen is set to PDF, DocuWorks,
or Multi-page TIFF.
For information about setting for page division, refer to "Page size
for Split Send" in the System Administration Guide or see your
System Administrator for help.
1.
From the Output Format tab, select Split Send.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e