Xerox 4110 User Manual page 280

7 . St o r e d P r o g r a m m in g
7 - 4
1.
From the All Services screen, select Setup Menu and then
Stored Program. Select Store.
2.
Select a number to register.
NOTE: Once a job is stored to a button, it cannot be edited. It
must be re-registered if changes need to be made.
Select to display the previous screen and select
display the next screen.
3.
Set the features you wish to register.
NOTE: A tone is generated while registering to job memory.
4.
Press the Start button or Clear All button to end registration.
NOTE: You can change the volume of the sound that notifies of
Stored Program registration. For information about setup, refer to
"Stored Programming Tone" in the System Administration Guide
or ask your System Administrator for help.
5.
The steps are stored. Select Close. You may wish to rename
the Stored Program. See "Naming/Renaming a Stored
Program" on page 7-7 for more information.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
to