When Reduce/Enlarge Preset Is Selected - Xerox 4110 User Manual

Hide thumbs Also See for 4110:
Table of Contents

Advertisement

X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
! Ratio (3rd to 5th Buttons)
Select from preset ratios.
You can change the indicated ratios. For information about the
setting procedures, refer to "Reduce/Enlarge - Button X" (where X
is the button number) in the System Administration Guide.
! More...
Display the Reduce/Enlarge screen.
Refer to "When Preset% is Selected," "When Variable% is
Selected," "When Independent X-Y% is Selected," and "When
Calculator% is Selected," for more information.

When Reduce/Enlarge Preset is Selected

You can select from preset standard copy ratios.
1.
From the Basic Copying screen, select More and then select
Preset%.
2.
Select the copy ratio.
! 100%
Copies are made at the same size as the document.
! Auto%
The copy ratio is automatically set based upon the document and
paper sizes, and the document is copied to fit in the selected
paper.
NOTE: If you select Auto%, specify a value other than Auto for
Paper Supply.
! Reduce/Enlarge Presets
Select from the preset copy ratios.
3 . C o p y
3-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

4590

Table of Contents