Xerox 4110 User Manual page 394

1 2 . P r o b le m S o l v in g
Copies are not made at
the desired size
No
1 2 - 1 8
Cause The paper tray is not set properly.
Action Firmly push in the tray as far as possible to set it
properly.
Refer to "Loading Paper in Trays 1 to 2" on page 8-5.
Cause The paper guide for Tray 5 (Bypass) is misaligned.
Action Load the paper correctly, and align the paper guide
with the edge of the paper.
Refer to "Loading Paper in Tray 5 (Bypass)" on
page 8-7.
Cause The document glass or the document cover is dirty.
Action Clean the document glass or the document cover.
Refer to "Cleaning the Document Cover and
Document Glass" on page 11-15.
Cause The document is made of highly transparent material
like a transparency.
Action Place a white sheet of paper on the document and
make a copy.
Cause The document is misaligned.
Action Load the document correctly.
Refer to "Step 1 Loading Documents" on page 3-2.
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the document
guides with the edges of the document.
Refer to "Step 1 Loading Documents" on page 3-2.
Cause The document is a non-standard size.
Action Enter the document size and then copy.
Refer to "Original Size (Specifying the Scan Size for
the Document)" on page 3-36.
Cause The document is folded or bent.
Action Straighten and properly reset the document.
Refer to "Step 1 Loading Documents" on page 3-2.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e