1 2 . P r o b le m S o l v in g
Paper Jams in Tray 8 (Post-process inserter)
1 2 - 5 4
Following describes how to remedy paper jams that occur on the
Interposer.
1.
Press the Cover button.
2.
Open the cover 1e and then remove the jammed paper and all
paper loaded in the Interposer.
KEY POINT: When two or more sheets of paper are loaded,
remove all of the sheets from the tray.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
3.
Fan the paper you removed, making sure that all four corners
are neatly aligned, and then load them again.
4.
Push the cover 1e until you hear it click into place and the
close it.
NOTE: A message will be displayed and the machine will not
operate if the cover is even slightly open.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e