Finishing - Stapling Screen - Xerox 4110 User Manual

5 . M a i l b o x M a n a g e m e n t
! Punch Position
You can set the position for punching. To use the settings that
were saved with the document, select Document Specified. If
you select More..., the Finishing - Punching screen appears.
! Z-Fold
You can output Z-folded copies. To use the settings that were
saved with the document, select Document Specified. Available
paper sizes for Z-folding are B4, A3, 11 X 17" and 8K.
NOTE: An optional package is necessary for this selection. For
more information, contact the Customer Support Center.

Finishing - Stapling Screen

You can select a stapling position that is not displayed on the
Finishing screen.
! Document Specified
Uses the same settings as when the document was saved.
! None
Copies are not stapled.
! 1 Staple
You can select from five positions for stapling.
! 2 Staples
You can select from three positions for stapling.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
5 - 4 7