Loading Paper In Trays 3 To 4 - Xerox 4110 User Manual

8 . P a p e r a n d O t h e r M e d ia

Loading Paper in Trays 3 to 4

8 - 6
Following describes the procedure for loading paper in trays
3 to 4.
For information about changing the paper size and orientation,
refer to "Changing the Size of Paper in Trays" on page 8-14.
1.
Pull out the tray towards you until it stops.
WARNING:When pulling out the paper tray, do it slowly.
If pulled out with too much force, the tray can hit and
injure your knees.
2.
Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing up.
KEY POINT: Do not load paper exceeding the maximum fill line.
Doing so might cause paper jams or machine trouble.
Do not put paper or anything on the empty space on the
right side of the trays 3 to 4. Doing so might cause paper
jams or machine trouble.
Ensure that the paper guide is adjusted to the size of the
paper currently loaded in the tray.
3.
Push the tray in gently until it comes to a stop.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e