1 2 . P r o b le m S o l v in g
1 2 - 7 0
3.
If you cannot remove the paper in Step 2, return lever 2e to the
original position. Swing lever 2e, turn knob 2c to the right, then
remove the jammed paper.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
4.
Swing back the opened lever (2f or 2e), and push back the tri-
fold output tray 2d.
5.
Close the Finisher right cover.
NOTE: A message will be displayed and the machine will not
operate if the Finisher right cover is even slightly open.
Paper jams at tri-fold output tray 2d and lever 2g
1.
Make sure that the machine has stopped and then open the
right cover on the light finisher.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e