Xerox 4110 User Manual page 409

Category
Error Code
C P S M O
016-220 %
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
016-450
016-454
016-503
016-504
016-505
016-701
%
016-702
%
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
% Cause An error occurred in the document scanner.
Remedy Power-cycle the machine. If the document scanner error
is not corrected by performing the relevant remedy,
contact the Customer Support Center.
% Cause The SMB host name already exists.
Remedy Change the host name.
For information about network settings, refer to the System
Administration Guide.
% Cause Unable to retrieve IP address from DNS.
Remedy Check the DNS configurations and IP address retrieve
method.
For information about network settings, refer to the System
Administration Guide.
% Cause Unable to resolve SMTP server name during E-mail
send.
Remedy Check that the SMTP server settings from CWIS are
correct. Also, check the DNS server settings.
% Cause Unable to resolve POP3 server name during E-mail
send.
Remedy Check that the POP3 server settings from CWIS are
correct. Also, check the DNS server settings.
% Cause Unable to login to POP3 server during mail send.
Remedy Check that the user name and password used in the
POP3 server from CWIS are correct.
Cause PCL print data could not be processed as there was
insufficient memory.
Remedy Reduce resolution, cancel 2 Sided printing or N up, and
try to print again.
Refer to the online help for the print driver.
Cause PCL print data could not be processed as there was
insufficient print page buffer.
Remedy Take one of the following actions:
#
#
#
#
For information about print modes and print guarantees, refer to the
online help for the print driver. For information about memory, refer
to "Allocate Memory" in the System Administration Guide.
Cause and Remedy
Set Print Mode to Speed Priority.
Use Ensure Print.
Increase the size of the print page buffer.
Add on memory.
1 2 . P r o b l e m S o l v i n g
12-33