Xerox 4110 User Manual page 127

3 . C o p y
! Uncollated
The machine can output the specified number of copies and sort
sheets by page.
! Staple Position
You can set the position for stapling. If you select More..., the
Copy Output - Stapling screen displays.
NOTE: The number of pages that can be stapled is 2 to 50
(P paper) when the Staple cartridge for 50 sheets XB is installed.
The number is 2 to 100 (P paper) when the Staple cartridge for
100 sheets XA is installed. Plain paper, recycled paper, lightweight
paper, heavyweight paper 1, side 2 paper, punched paper, tab
paper 1, and custom paper 1 to 5 can be stapled.
! Punch Position
You can set the position for punching. If you select More..., the
Copy Output - Punching screen displays.
! Z-Fold
You can output Z-folded copies. Available paper sizes for Z-folding
are B4, A3 and 11 X 17."
When loading mixed size documents, load only the documents
with the same length for the edge to be inserted. For example,
load 8.5 x 11 in./A4 portrait and A3, or B5 portrait and B4. When
you load an 8.5 x 11 in./A4 portrait sheet with an A3 sheet, the
only A3 copy will be
Z-folded.
KEY POINT: An optional package is necessary for this selection.
For more information, contact the Customer Support Center.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e
3-83