Xerox 4110 User Manual page 404

1 2 . P r o b le m S o l v in g
Image is too dark, or
too light
No
Part of the image is
missing
No
The image is not the
desired size
No
1 2 - 2 8
Cause Scan density is set to Dark, or to Light.
Action Adjust the scan density.
Refer to "Lighten/Darken (Adjusting Scan Density)"
on page 4-28.
Cause The Original Type is inappropriate.
Action Select an image quality appropriate for the
document.
Refer to "Image Quality" on page 4-33.
Cause The document is pasted together or folded in.
Action It is possible that the folded in or pasted part of the
document is not touching the document glass. Place
a stack of white sheets on the document to hold the
document down flat against the document glass.
Cause The document glass or the document cover is dirty.
Action Clean the document glass or the document cover.
Refer to "Cleaning the Document Cover and
Document Glass" on page 11-15.
Cause The document is made of highly transparent material
like a transparency.
Action Place a white sheet of paper on the document and
scan.
Cause The document is misaligned.
Action Load the document correctly.
Refer to "Step 1 Loading Documents" on page 4-2.
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the
document guides with the edges of the document.
Refer to "Step 1 Loading Documents" on page 4-2.
Cause The document is a non-standard size.
Action Enter the document size and then scan.
Refer to "Scan Size (Specifying a Scanning Size)" on
page 4-38.
X e r o x 4 11 0 / 4 5 9 0 U s e r G u i d e