Table of Contents
Advertisement
Applications
Frame/Fold Erasure (continued)
1 Press [
APPLICATION
Screen.
2 Touch
Frame/Fold Erasure
3 Touch
Frame Erasure
from 1~15 mm in 1 mm increments.
Touch
Fold Erasure
1~30 mm in 1 mm increments.
Touch
Frame Erasure
4 Touch
to complete the setting. The Application Selection Screen will be restored.
OK
5 Make additional application selections, or touch
6 Enter the desired print quantity from the control panel keypad.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-29 to p. 6-30.
8 Press [
].
START
After copying is completed, press [
machine.
8-38 Applications
] on the control panel to display the Application Selection
to display the Frame/Fold Erasure Setting Screen.
, then use arrows to select the desired frame erasure amount,
, then use arrows to select the desired fold erasure amount, from
and
Fold Erasure
AUTO RESET
to use both modes.
to return to the Basic Screen.
OK
] to release the mode and reset the
Advertisement
Table of Contents
Troubleshooting
