Table of Contents
Advertisement
Applications
Image Insert (continued)
7 Enter the desired print quantity from the control panel keypad.
8 Scan the document feeder images.
(1) Position originals FACE UP in the document feeder. 50 originals can be set at a
time.
(2) Touch
SCAN
Repeat steps (1) and (2) for all originals.
9 Scan the platen glass images.
(1) Open the document feeder.
(2) Position an original FACE DOWN on the platen glass, then close the document
feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS ACCORDING TO
PAGINATION.
(3) Touch
SCAN
(4) Remove the original, and for each original.
Be sure to touch
Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return to
the Basic Screen. See p. 6-29 to p. 6-30.
10 Press [
].
START
After copying is completed, press [
machine.
on the Basic Screen to scan originals.
on the Basic Screen to begin scanning.
on the Basic Screen for each original.
SCAN
AUTO RESET
] to release the mode and reset the
Applications 8-19
Advertisement
Table of Contents
Troubleshooting
