Table of Contents
Advertisement
Applications
STAMP/OVERLAY (continued)
To use STAMP:
1 Press [
APPLICATION
2 Touch
STAMP/OVERLAY
3 Touch
ORIGI. DIRECT
Touch the key to match the originals to be copied, then touch
Stamp/Overlay Selection Screen.
4 Touch to select the desired stamp to display the subsequent screen.
On each screen, you can specify the desired type of the selected stamp.
Touch
POSITION
desired position from 6 location keys on the screen.
Touch
Only first page
5 Touch
to return to the Stamp/Overlay Selection Screen.
OK
6 Repeat the step 4 and 5 if more than one stamp is desired.
7 Touch
to complete the settings and return to the Application Selection Screen.
OK
8 Make additional application selections, or touch
9 Enter the desired print quantity from the control panel keypad.
10 Position original(s) FACE UP in document feeder or FACE DOWN on platen glass.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-29 to p. 6-30.
11 Press [
].
START
After copying is completed, press [
machine.
To use OVERLAY:
1 Press [
APPLICATION
2 Touch
STAMP/OVERLAY
3 Touch
Overlay
4 The Store mode is automatically selected, and APS and AMS are released. Set the
desired Copy mode, Copy density, Lens mode, and Copy size on the Basic Screen.
5 Enter the desired print quantity from the control panel keypad.
6 Position the overlaying original in the document feeder or on the platen glass, then
touch
to scan.
SCAN
7 The second and subsequent pages are to be overlaid in printing. Place them in the
document feeder or on the platen glass, then touch
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
Option: Press [CHECK] to view selection, and make the Proof copy, if desired; then touch EXIT to return to
the Basic Screen. See p. 6-29 to p. 6-30.
8 Press [
] to print.
START
After copying is completed, press [
machine.
] on the control panel to display the Application Selection Screen.
. The Stamp/Overlay Selection Screen will be displayed.
to display the Original Direction Screen.
to display the Print Position Selection Screen, then select the
to print the selected stamp on the first page only.
] on the control panel to display the Application Selection Screen.
. The Stamp/Overlay Selection Screen will be displayed.
. The Basic Screen will be automatically restored.
to return to the Basic Screen.
OK
] to release the mode and reset the
AUTO RESET
SCAN
] to release the mode and reset the
AUTO RESET
to return to the
OK
.
Applications 8-47
Advertisement
Table of Contents
Troubleshooting
