Table of Contents
Advertisement
Shortcuts
Book Copy (see p. 8-20)
1 First, load an even number of letter sheets into a regular tray.
2 Press [
APPLICATION
3 Touch
Book Copy
image area erase selected.
4 Touch
full scan
5 Touch
to return to the Application Selection Screen.
OK
6 Make additional copying selections.
7 Touch
to return to the Basic Screen.
OK
8 Select 1-1 or 1-2 copy mode and the print quantity amount.
9 Position the open book in the left rear corner on the platen glass, starting from the
last page.
10 Align the edges of the book with the left measuring guide plate, then touch
begin scanning.
11 Remove the book and copy additional pages as needed, touching
each page.
12 Press [
] to begin copying. When copying is completed, press [
START
reset the machine.
Special Original: Mixed Original (see p. 8-23)
1 Press [
APPLICATION
2 Touch
Special Original
3 Touch
Mixed Original
4 Touch
to return to the Application Selection Screen.
OK
5 Make additional copying selections.
6 Touch
to return to the Basic Screen.
OK
7 Select APS to copy onto various paper sizes to match the original sizes, or select
AMS mode to copy all originals onto one common paper size.
8 Enter the print quantity amount.
9 Position mixed originals face up on the RADF (document feeder) tray.
Combine ledger, legal, letter, and 5.5"x8.5" or legal, letter R, letter, and 5.5"x8.5".
10 Press [
]. When copying is completed, press [
START
machine.
10-6 Shortcuts
] to display the Application Selection Screen.
to display the Book Copy Screen with AUTO layout and non-
,
front cover + full scan
] to display the Application Selection Screen.
to display the Special Original Screen.
.
, or
front/back + full scan
AUTO RESET
, as required.
SCAN
to scan
SCAN
AUTO RESET
] to reset the
to
] to
Advertisement
Table of Contents
Troubleshooting
