Konica Minolta 7045 User Manual page 19

Hide thumbs Also See for 7045:
Table of Contents

Advertisement

Introduction
Features of the Konica 7045 Printer/Copier (continued)
• Output (When No Finisher is installed)
Normal, Alternate and Face Up exit modes are available.
Use the Sort with normal exit as the default condition to output copies in the same order
as the originals. Use the Group with normal exit to output multiple copies of each
original.
Use the Sort with alternate exit to alternately switch the horizontal-vertical orientation of
each copied set. Use Group with alternate exit to alternately switch the horizontal-
vertical orientation of multiple copies of each original. Use the Face Up exit together with
Sort, Group, and/or Alternate exit to output copies facing up.
• Overlay
This Application mode feature allows you to scan an original image and overlay it on the
pages of another document. For example, you may want to incorporate a page heading,
graphic design or logo into the pages of your document.
• Paper Capacity
Total 2,100 sheets in the machine with DB-208 drawer, including four 500-sheet trays
and a 100-sheet Multi-sheet bypass tray.
Total 1,100 sheets in the machine with DB-208A drawer, including two 500-sheet trays
and a 100-sheet Multi-sheet bypass tray.
Total 2,600 sheets in the machine with DB-608 drawer, including two 500-sheet trays, a
1,500-sheet tray and a 100-sheet Multi-sheet bypass tray.
• Power Saver
The Power Saver mode enables you to conserve energy when the machine is not in use.
For example, the 7045 will power down after a specified amount of time has elapsed,
adjustable for up to 4 hours.
• Proof Copy
Proof Copy allows you to print one finished set for the purpose of reviewing the result of
the job settings you selected. This is particularly useful when running a large job. If the
proof copy indicates the need for change, you can make the change, then press [
]
START
to complete the job.
• Recall
Touch the Recall key while your job is running to display the print quantity amount
selected for the job. This is convenient when you cannot recall the amount you selected.
Introduction 1-9

Advertisement

Table of Contents
loading

Table of Contents