Maintenance & Supplies
Loading Paper (continued)
Loading Paper in Multi-Sheet Bypass Tray
1 Open the Multi-sheet bypass tray located on the right side of the copier.
When loading 11"x17" or 8.5"x14" paper, pull out the right edge to extend the tray.
2 Insert copy paper while adjusting the paper guides to the paper size.
Insert transparency film one sheet at a time; or, stack paper up to 100 sheets 20 lb
Bond.
NOTE: For detailed copy paper information, see p. 4-6.
3 When copying is completed, close the Multi-sheet bypass tray.
12-6 Maintenance