Konica Minolta 7045 User Manual page 18

Introduction
Features of the Konica 7045 Printer/Copier (continued)
• Job List
Display the current machine status on the LCD.
• Job Memory
Store up to 15 frequently performed jobs and eliminate the need to repeat the same job
features time and again.
• Lens Mode
Select Preset and Userset ratios, three reduction, three enlargement and three userset;
select a Zoom ratio from 25% ~ 400%; or select a Vertical/Horizontal Zoom ratio from
vertical zoom 25% ~ 400% and horizontal zoom 25% ~ 400%.
• Magnification
The key operator can set three user-programmable ratios, from 25% ~ 400%.
• Manual Shut-Off
Press the power saver ON/OFF switch to shut off the main power.
• Mixed Original Mode
This Application mode feature enables you to copy multi-size originals in one of two
modes. In APS mode, output paper will match the multi-size papers in the original
document. In AMS mode, output will be made on a selected uniform paper size and the
appropriate magnification ratio will be selected automatically.
• Non Image Area Erase
This Application mode feature enables you to leave the platen cover open during
copying without causing black borders to appear on the output copies. This is useful
when you need to copy originals that are unsuitable for the RADF. When using this
mode, be sure the overhead lighting in your workplace is not directly over the platen
glass, as this will cause Non-image area erase to function incorrectly.
• Output (When Finisher is installed)
Non-sort, Sort, Staple-Sort, Group and Face Up modes are available. Output the Non-
Sort copies in the same order as the originals, without offsetting. Output the Sort copies
offsetting each set. Output the Staple-Sort copies with each set stapled. Output the
Group copies by offsetting each group. Output the Face Up copies facing up in reverse
order of the originals, without offsetting.
Finisher is equipped with three exit trays. Tray 1 (Finisher upper exit tray) enables you
to select Group and/or Face Up mode(s). Tray 2 or 3 (Finisher middle/lower exit tray)
enables you to select Sort, Group, or Staple-sort.
1-8 Introduction