Table of Contents
Advertisement
Key Operator Mode
ECM (Electronic Copy Monitor) [4] (continued)
ECM Data List [2] (continued)
4 To delete the ECM data, operate the procedure below.
(1) Touch the
Screen to highlight the ECM data to be deleted.
(2) Touch
DEL
(3) Touch
Yes
5 To add the ECM data, touch
will be displayed. To input the ECM data, see p. 11-22 to p. 11-23.
6 To edit the ECM data, touch the
the ECM Data List Screen to highlight the ECM data to be edited, then touch
The ECM Data Edit Screen with valid
(1) To edit the ECM password, touch
using the keypad on the Control panel. Do not enter "00000".
(2) To edit the name, touch
input a new name, see the procedure on p. 11-23.
(3) To edit the copy limit, Touch
keypad on the Control panel. Entering "000000" signifies no copy limit.
(4) To clear the copy count, touch
7 Touch
on the ECM Data Input Screen or the ECM Data Edit Screen to complete
OK
the settings and return to the ECM Data List Screen.
To cancel the changes made in step 5 or 6, touch
List Screen.
8 Touch
RETURN
Screen. If other ECM setting changes are required, touch the desired key.
9 Touch
RETURN
settings are required, touch the desired key.
10 If no further changes are required, touch
perform copying operations.
Upper arrow or
. The Delete Confirmation Screen will be displayed.
to delete, or touch
ADD
Name
on the ECM Data List Screen to restore the ECM Setting Menu
to restore the Key Operator Mode Screen. If other key operator
Lower arrow key on the right in the ECM Data List
to cancel.
No
. The ECM Data Input Screen with invalid
Upper arrow or
key will be displayed.
Clear
. Enter a new 5-digit ECM password
Password
. The Name Input Screen will be displayed. To
. Enter a new 6-digit copy limit using the
Limit
.
Clear
RETURN
to restore the Basic Screen to
RETURN
Lower arrow key on the right in
to restore the ECM Data
Key Operator Mode 11-25
key
Clear
.
EDIT
Advertisement
Table of Contents
Troubleshooting
