Table of Contents
Advertisement
Key Operator Mode
ECM (Electronic Copy Monitor) [4] (continued)
Change ECM Data [1] (continued)
1 Press [
] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
4. E.C.M
ECM Setting Menu Screen.
NOTE: If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
3 Touch
1. Change E.C.M. data
4
key is highlighted, enabling you to immediately enter an ID No. Enter a 3-digit
ID No.
ID No. from 000~255 using the keypad on the Control panel.
5
key is highlighted, enabling you to immediately enter an ECM password.
Password
Enter a 5-digit ECM password using the keypad on the Control panel.
NOTES:
1. Do not enter "00000". The initial ECM password value is "00000".
2. We recommend that you make a list of all ECM passwords and ID Nos.
6 Touch
to display the Name Input Screen.
Name
If you do not specify the name, proceed to step 10. This operation can be completed
normally without the name specified.
7 Input desired name according to the procedure below.
(1) Max. 20 characters can be entered.
(2) Use
Upper arrow and
uppercase and lowercase letters and symbols.
(3) Touch
DEL.
(4) Touching
CANCEL
(5) To change the existing name, touch
8 Touch
on the Name Input Screen to return to the ECM Data Input Screen.
OK
9 Touch
. Limit key will be highlighted, enabling you to immediately enter copy
Limit
limit.
10 Enter a 6-digit copy limit for the ID No. using the keypad on the Control panel. The
input copy limit will be displayed on the right of the copy count.
NOTES:
1. If an invalid copy limit is entered, continue by entering the valid 6-digit copy limit.
2. Entering "000000" signifies no copy limit.
3. The Clear key, though it clears copy count, does not function on the ECM Data Input Screen.
11-22 Key Operator Mode
. Enter an 8-digit ECM master key code, then touch
to display the ECM Data Input Screen.
Lower arrow keys on the Name Input Screen to input
to delete the input character from the last.
on the Name Input Screen will clear all the input characters.
Key-Ope mode
to display the Key Operator
OK
to delete it and enter the new name.
DEL.
.
to display the
OK
Advertisement
Table of Contents
Troubleshooting
