Konica Minolta 7045 User Manual page 145

Applications
Repeat (continued)
Vertical/Horizontal Width Setting Mode Specifications
Use the platen glass. (Document feeder cannot be used.)
Repeat width: 10~150mm (in 1mm increments)
Copy mode: 1-1 mode only (When selecting 1-2 mode, Platen store mode will function
automatically.)
Auto Detection Mode Specifications
Use the platen glass. Non-image Area Erase will function automatically.
Scanning area: 11"x17" ~ 10mm x 10mm
Repeat image area: Original image area detected by Non-image Area Erase
Copy mode: 1-1 mode only (When selecting 1-2 mode, Platen store mode will function
automatically.)
Repeat Mode Specifications
Magnification ratio: 1.00 (100 %)
Scanning area: 11"x17" ~ 10mm x 10mm
Repeat image area: A portion of the selected copy size equally divided according to the mode
(RepeatX2, RepeatX4, or RepeatX8) designated on the screen. If the detected image size is
larger than the size determined in the above explanation, the copy result may be unsatisfactory.
Incompatible Conditions with Vertical /Horizontal Width Setting Mode
Basic copying conditions: Using RADF, 2-2, 2-1, APS, AMS
Output modes: Sort, Staple, Group
Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleaving
mode in Special Paper, Image Insert, Book Copy, Special Original (Mixed Original, Folded
Original, Non-Standard Size, Upside Down), Frame/Fold Erasure, AUTO Layout, Image Shift,
Non-Image Area Erase, STAMP/OVERLAY
Incompatible Conditions with Auto Detection Mode
Basic copying conditions: Using RADF, 2-2, 2-1, APS, AMS
Output modes: Sort, Staple, Group
Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleaving
mode in Special Paper, Image Insert, Book Copy, Special Original (Mixed Original, Folded
Original, Non-Standard Size, Upside Down), Reverse Image, Frame/Fold Erasure, AUTO
Layout, Image Shift, STAMP/OVERLAY
Incompatible Conditions with Repeat Mode
Basic copying conditions: 2-2, 2-1, APS, AMS, Change magnification
Output modes: Sort, Staple, Group
Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleaving
mode in Special Paper, Image Insert, Book Copy, Special Original (Mixed Original, Folded
Original, Non-Standard Size, Upside Down), Frame/Fold Erasure, AUTO Layout, Image Shift,
STAMP/OVERLAY
NOTE: The Auto Detection mode of the Repeat image function may not operate properly if the lighting in the
work place is directly over the platen glass. In this case, consult your service representative about an
appropriate place for installation.
8-34 Applications