Machine Installation And Power Requirements - Konica Minolta 7045 User Manual

Safety Information

Machine Installation and Power Requirements

CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR
MACHINE DAMAGE
FIRE PREVENTION
Install machine away from flammable or volatile materials. Routinely check for abnormal
heat from power cord and/or plug.
SHORT CIRCUIT FROM WATER DAMAGE
Do not install or operate this equipment outdoors near a lake, pond, or river, etc.; and do
not allow the machine to come in contact with splashes of rain, water, or any liquid.
TEMPERATURE AND HUMIDITY
Install the machine away from direct sunlight, heat sources
(stoves, heaters) and cold temperatures (air conditioners).
Avoid any environment that is outside 50 C~86 F
(10 ~30 C), with 10~80% humidity.
VENTILATION
Do not allow the machine to come in contact with dust or
ammonia gas, or fumes from printing or cleaning solutions,
etc.; otherwise, image quality will be poor. Install the
machine in a well-ventilated area, for comfort; otherwise, an
ozone odor will be detected during large copy runs. When in
use, the copier generates ozone in amounts too small to be
hazardous to the human body.
VIBRATIONS
If the machine is constantly vibrated or jolted, trouble may
occur. Install the machine on a level, horizontal floor, free
from vibrations.
SPACE ALLOTMENT
Install machine in an area with adequate space for performing copier operations;
replacing supply items; and for conducting preventive maintenance. See Site
Requirements, Section 3.
MACHINE RELOCATION
Before moving the machine to another location, contact your Konica service
representative.
2-6 Safety Information
Temperature
Vibration