Table of Contents
Advertisement
Key Operator Mode
Preset Key [3] (continued)
Density [1] (continued)
6 To program Userset (1 or 2) to a darker level, perform the following operation, then
proceed to step 8.
(1) Touch
No.1 1~4
darker level sample sheet will be output.
(2) Select the desired darker exposure level from the sample sheet(s), then touch
the density No. from
7 To program Userset (1 or 2) to a lighter level, perform the following operation, then
proceed to step 8.
(1) Touch
Lighter
(2) Touch
No.1 1~4
lighter level sample sheet will be output.
(3) Select the desired lighter exposure level from the sample sheet(s), then touch
the density No. from
8 Touch
to complete the settings and return to the Userset Density Selection
OK
Screen. If setting another Userset, repeat steps 5 to 8.
9 Touch
RETURN
Setting Menu Screen. If the other preset key setting change is required, touch the
key.
10 Touch
RETURN
settings are required, touch the desired key.
11 If no further changes are required, touch
perform copying operations.
,
,
No.2 5~8
No.3 9~12
to
.
1
16
to display the Userset Density Lighter Setting Screen.
,
,
No.2 5~8
No.3 9~12
to
.
1
16
on the Userset Density Selection Screen to return to the Preset Key
to restore the Key Operator Mode Screen. If other key operator
, or
, then press [
No.4 13~16
, or
, then press [
No.4 13~16
to restore the Basic Screen to
RETURN
]. The
START
]. The
START
Key Operator Mode 11-17
Advertisement
Table of Contents
Troubleshooting
