Konica Minolta 7045 User Manual page 132

Applications
Book Copy (continued)
1 Load an even number of 8.5"x11" or 5.5"x8.5"R sheets in a tray or in the Multi-sheet
bypass tray.
2 Press [
APPLICATION
Screen.
3 Touch
Book Copy
4 Touch either key in the OUTPUT section to select the scanning order according to
the original, and touch
required.
Option: Touch Booklet on the Book Copy Screen to use this function.
5 Touch to complete the settings and return to the Application Selection Screen.
OK
6 Make additional application selections, or touch
7 Select the desired copy mode, magnification, and copy size.
NOTE: When selecting full scan and using platen glass, select 1-1 or 1-2 copy mode.
8 Enter the desired print quantity from the control panel keypad.
9 Position the open book or sheet on the platen glass in the left rear corner, aligning
the edge with the left measuring guide. To output the set in the same order as the
originals, start scanning from the first page.
"Front Cover + Full Scan"
"Front/Back + Full Scan"
] on the control panel to display the Application Selection
to enter the Book Copy Screen.
,
full scan front cover + full scan
SURVEYOR'S
REPORT
SURVEYOR'S
REPORT
, or
to return to the Basic Screen.
OK
Scan from
SURVEYOR'S
first page
SURVEYOR'S
REPORT
front/back + full scan
10
8 9
6 7
4 5
2 3
1
REPORT
Copies
2 3
Scan from
1
SURVEYOR'S
REPORT
first page
Applications 8-21
, as
10
8 9
6 7
4 5
Copies