Konica Minolta 7045 User Manual page 91

Basic Operations
Interrupt Mode (continued)
3 Remove any document from the platen glass or from the document feeder, if
present.
4 Place new original(s) FACE DOWN on the platen glass or FACE UP in the document
feeder.
5 The copying settings in Interrupt mode are as follows.
Copy Mode
RADF
AES
Lens Mode
APS
Print Quantity : 1
Finisher
Output mode for machine without Finisher : Sort
*: The copier with Finisher will output copies on the Finisher lower tray.
Select other copying features that are compatible with the Interrupt mode, if desired.
6 Press [ ].
START
7 When Interrupt copying is completed, press [
settings of the initial job.
8 Replace the initial original, then press [
NOTE:
1 In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning the reserve job originals
clears the settings selected for the reserve job.
2 When [CHECK] is pressed during Interrupt Copying, the information displayed reflects the initial copy job
settings. Check mode will not display Interrupt copy job information.
6-32 Basic Operations
: 1-1
: ON
: ON
: 1.00 (100%)
: ON
: OFF*
] again to return to the
INTERRUPT
] to resume copying.
START