Ecm On/Off Setting [4] - Konica Minolta 7045 User Manual

Key Operator Mode
ECM (Electronic Copy Monitor) [4] (continued)

ECM On/Off Setting [4]

Use this function to turn ECM ON or OFF.
NOTE: If ECM OFF is selected while ECM functions, the copier will be enabled to perform copying job
without an ECM password entered, and both copy count and copy limit functions will be discontinued.
Default setting: ECM on
Key Operator Mode Screen
1 Press [ ] to display the Help Screen, then touch
HELP
key operator password, then touch
NOTE: If an invalid key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
4. E.C.M
ECM Setting Menu Screen.
NOTE: If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
3 Touch
4. ECM On/Off setting
4 Touch to activate ECM or touch
ON
The selected key will be highlighted.
5 Touch to complete the settings and return to the ECM Setting Menu Screen.
OK
If other ECM setting changes are required, touch the desired key.
6 Touch
RETURN
settings are required, touch the desired key.
7 Touch
RETURN
ECM Setting Menu Screen
. Enter an 8-digit ECM master key code, then touch
to display the ECM On/Off Setting Screen.
to restore the Key Operator Mode Screen. If other key operator
to restore the Basic Screen to perform copying operations.
Key-Ope mode
to display the Key Operator Mode Screen.
OK
to de-activate ECM.
OFF
ECM On/Off Setting Screen
. Enter a 4-digit
to display the
OK
Key Operator Mode 11-27