Table of Contents
Advertisement
Key Operator Mode
Copier Initial [2] (continued)
Copy Mode [1]
Set Copy mode to occur after power on or after Auto/Reset occurs.
Setting options: RADF; 1-1; 1-2; 2-2; 2-1
Default setting: RADF on, 1-1
Key Operator Mode Screen
1 Press [
] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
2. Copier Initial
to display the Copy Mode Initial Setting Screen.
Copy mode
3 Touch the setting you want for the initial condition of the copier.
If 2-2 or 2-1 mode is selected,
the RADF must be in a closed position when power is turned ON, or when Auto/
Reset is functioning. Otherwise, the message "Please close RADF" will be displayed.
4 Touch
to complete the setting and return to the Copier Initial Setting Menu
OK
Screen. If other copier initial setting changes are required, touch the desired key.
5 Touch
RETURN
settings are required, touch the desired key.
6 If no further changes are required, touch
perform copying operations.
Copier Initial Setting Menu Screen
to display the Copier Initial Setting Menu Screen, then touch
RADF
to restore the Key Operator Mode Screen. If other key operator
Key-Ope mode
to display the Key Operator
OK
will also be selected, automatically. In this case,
to restore the Basic Screen to
RETURN
Copy Mode Initial Setting Screen
.
Key Operator Mode 11-9
1.
Advertisement
Table of Contents
Troubleshooting
