Konica Minolta 7045 User Manual page 126

Applications
Special Paper (continued)
Transparency Interleaving (continued)
Application Selection Screen
1 Load copy paper in tray 1, 2, 3, or 4 to match the size of transparencies.
2 Open the Multi-sheet bypass tray. Insert one transparency at a time into the Multi-
sheet bypass tray, and adjust the paper guides.
IMPORTANT: Do not load transparencies into any other tray.
3 Press [
APPLICATION
Screen.
4 Touch
Special Paper
5 Touch
Blank Sheet Interleaving
highlighted.
6 Touch to return to the Application Selection Screen.
OK
7 Make additional application selections, or touch
8 Print quantity is already set to 1, and no higher quantity may be selected.
9 AMS is selected automatically.
Select the tray in which you load copy paper in step 1.
To release AMS, select the desired magnification.
10 Place original FACE UP in the document feeder or FACE DOWN on the platen
glass.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-29 to p. 6-30.
11 Press [ ].
START
After copying is completed, press [
machine.
] on the control panel to display the Application Selection
to display the Special Paper Mode Selection Screen.
or
Copy Sheet Interleaving
AUTO RESET
Special Paper Mode Selection Screen
, unless it is already
to return to the Basic Screen.
OK
] to release the mode and reset the
Applications 8-15