Konica Minolta 7045 User Manual page 20

Introduction
Features of the Konica 7045 Printer/Copier (continued)
• Repeat Image
This is a feature of the Application mode that enables you to repeat a small image many
times on one page. This is handy for making copies of your business card or a
notification form.
• Reverse Image
This is a feature of the Application mode that reverses the original image from black
image on white background to white image on black background, and vice versa.
• Rotation Exit
When no Finisher is installed, you can separate each output set by alternately switching
the horizontal and vertical orientation of each sorted set as it outputs to the exit tray. Be
sure to load both 8.5"x11" and 8.5"x11"R paper in separate trays including the Multi-
sheet bypass tray.
• Scan
The key is used in certain applications that require a scanning step before starting
SCAN
the job.
• Sheet/Cover Insert
This is a feature of the Application mode that enables you to insert covers into the
finished document or insert special sheets within the finished document at locations
specified as you set up the job.
• Sort Mode
Use Sort mode to make multiple copies of the original set. For example, if you select
print quantity of 5, you will make 5 sets of the originals.
• Special Paper
This is a feature of the Application mode to be specified when using special paper for
copying, i.e. transparency film, thick paper or thin paper. When using transparency,
select either Blank or Copy Sheet Interleaving mode for each original.
• Staple
Select the desired staple position for your document after touching the key
STAPLE SET
on the Output Mode Screen. Place one staple in the upper left corner of portrait or
landscape sheets or place two staples along the left side of portrait or landscape sheets.
1-10 Introduction